Development / 31 October 2026

Developing
the Barrister

The timing behaviour works in software. The current watch exists as editable artwork, dimensional CAD and rendered material studies. The mechanical module, complete assembly and production processes remain to be developed.

No movement has been selected. No physical mechanical prototype has been built.

01 / Timing and display

The intended
interaction

Start a task, follow its progress, then stop to read a total in hours and six-minute units. The accumulated active time rounds up once when stopped; an exact six-minute boundary stays unchanged. Resume returns to the retained unrounded time.

Hours and tenths carry together. Fifty-nine minutes and one second becomes one hour and zero tenths when stopped. This behaviour is implemented in the software study.

The current digital design has two registers, a 39 mm case and printed lettering with applied Arabic 12 and 6. Ivory, Ink and Silver are material studies of the same construction.

The founder has rejected the current appearance; it is not a selected product design. The case proportions, broad lug junctions, central stack, controls and weak dial markings require further design work.

Try the display behaviour

02 / Available today

Artwork,
CAD and editing

The saved design records the lettering and component choices used in the published CAD capture and renders.

  • Browser authoring

    Independent saved designs, shared components, explicit local forks, Undo and native file reopening are available. Dial marks retain their text, letterforms, position, region, material and printed or applied construction.

  • Captured geometry and artwork

    The current capture has 17 valid solids per variant, including three separate applied numeral pieces. That is computational validation, not evidence of attractive composition, printing quality or physical fit. STEP files and vector artwork are available below.

  • Views of the capture

    Front, oblique and profile images are rendered in Blender from the captured CAD and artwork. The studio includes an interactive three-dimensional model of that capture. Browser edits do not regenerate this captured view.

Open the design studio

The public studio supports browser authoring and captured-CAD inspection. New STEP builds and Cycles renders require the local CAD service. This is a working subset of the authoring tools, not a complete general-purpose watch CAD system.

03 / Mechanical development

The mechanism
remains unbuilt

The SW510 M is a donor and layout reference, not a selected movement. Its stock left running-seconds, right thirty-minute and lower twelve-hour outputs do not supply the proposed Barrister hours and tenths.

  • Transmission, rounding and retention

    Software and event studies preserve raw time and apply one global ceiling when stopped. They do not establish a mechanical transmission, sensor, clutch, energy budget or reliable reversible carry.

  • Complete assembly

    The lower donor output still needs accommodation through the dial. Module height is unknown. Retention, seals, actuation, purchased hand fitting, assembly paths and production tolerances remain unresolved.

  • Case and production

    The current exterior is 13.1 mm thick. It excludes the unknown height of a qualified custom module and does not establish the complete production stack. No printing or finishing process has been qualified.

The next mechanical decision needs a buildable proposal followed by a measured prototype. CAD and rendered images cannot establish the performance or fit of that assembly.

Read the design notes

04 / Production and business

Early-batch
assumptions

The operating hypothesis is founder assembly of early batches using purchased movements and externally manufactured components. Swiss, Chinese and Japanese parts routes are being considered alongside local assembly and finishing. No supplier is selected or qualified.

Broader design-tool access and company-commissioned watches are possible later applications. Customer demand and a separate software business have not been established.

  • Cost model

    An illustrative 25 / 50 / 100-watch model separates parts, tooling, founder time, yield, service inventory and cash committed before sales. Its inputs are assumptions, not supplier quotes. It excludes the Barrister mechanism and software development.

  • Supplier and assembly evidence

    Supplier terms, first articles, finished-part quality, assembly time and test time still need validation. Separate colourway minimums may tie up inventory even when the case is shared.

  • Customer validation

    The watch, price and service offer need testing with prospective customers before a production commitment. No orders, willingness-to-pay results, conversion rate or funded launch schedule are claimed here.

Review the planning assumptions

05 / Review files

Current
downloads

These files belong to the capture shown on this site. They are review artifacts, not manufacturing-release drawings. The native design preserves the letterforms and individual component choices.

The presentation, finish views and public studio refer to one captured design. Edits made in the studio stay in your browser and do not change these published views.